‘ PAPER FEED SWITCH ’ until the remaining paper is out completely.
**: Do not touch the surface of the paper as it may cause poor printing.
**: Always store the paper rolls in a cool, dry place and keep away from direct
sunlight.
Print / Upload race:
Once the printer switch is slide to ‘ ON ’, the printer is ready for printing.
The Lane Timer can print and upload data to the PC computer at the same time.
To upload data to computer, the computer must have the ‘ Multi Lane Upload Software ’
installed (please see
MultiLane upload program
).
Follow the steps below to connect the computer and the timer:
1. Shut down the computer.
2. Plug the USB upload cable into the USB socket of the computer.
3. Insert the telephone-plug end of the connector cable into the left hand side of the timer
labeled ‘ PC ’ (Fig. 30)
4. Plug the jack end of the connector cable into the socket of the upload cable completely
(Fig. 31).
Fig. 30 Fig. 31
Print race record in memory:
Switch to recall mode by pressing [
MODE
] and use [
⇐
]
or
[
⇒
] to select race to print.
Press [
PRINT/UPLOAD
] will display two options (Fig. 32); press [
1
] to print all race
records in the memory or press [
2
] to print the selected race record only.
Fig. 32
‘ PRINTING ’ will be shown on the display while printing data and ‘ FINISHED ’ when
printing is finished.
The timer can also print or upload the final result in the order of places. Just select the
race and press [
SET/RESULT
].
In case of running out of paper, the printer can be paused by pressing [
PRINT/UPLOAD
]
,
the display is as shown in Fig. 33. Press the same key again will start printing again
without losing any data.
9