Digi ETHERIOS ConnectCore 6 Reference Manual Download

Page: 2 / 15

Digi, Digi International, the Digi logo, and ConnectCore 6

are trademarks or

registered trademarks in the United States and other countries worldwide. All

other trademarks mentioned in this document are the property of their respective

owners.

Information in this document is subject to change without notice and does not

represent a commitment on the part of Digi International. Digi provides this

document “as is,” without warranty of any kind, expressed or implied, including,

but not limited to, the implied warranties of fitness or merchantability for a

particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Contacting Technical Support

Digi International Inc. World Headquarters

11001 Bren Road East Minnetonka, MN 55343



Phone: (866) 765-9885 toll-free U.S.A. & Canada

(801) 765-9885 Worldwide

8:00 am - 5:00 pm (U.S. Mountain Time)

Online Support:

www.digi.com/support/

Email:

tech.support@digi.com

Fax: 952-912-4952

Revision Record

Revision Date (MM/DD/YY) Description
A

05/22/2014

Preliminary draft release

Summary of Contents for ETHERIOS ConnectCore 6
















Search results

Summary of Contents for ETHERIOS ConnectCore 6

Reviews:

Related manuals for ETHERIOS ConnectCore 6

Brands by name

Popular brands

Digi ETHERIOS ConnectCore 6, Reference Manual

Search results

Summary of Contents for ETHERIOS ConnectCore 6

Reviews:

Related manuals for ETHERIOS ConnectCore 6

Brands by name

Popular brands