MIL-3000FTX Series of FastPort Print Servers
11-1
C h a p t e r 1 1
Ping and BOOTP Server
Chapter 11 covers both the Ping and BOOTP applications. Ping is used to
see whether or not a device is “alive.” BOOTP allows users to dynamically
assign IP addresses to a device.
11.1 Launching the Ping Application
Ping sends a packet over the network directed to a specific device to
inquiry if it is on-line or not. To launch Ping:
1. Double-click on the
Ping Application
icon
2. The “Ping Window Application” window appears. Click the
Ping
pull-
down menu.
3. The “Perform Ping Operation” menu appears (Figure 11-1). Enter the IP
address to be pinged.Click
Ping
. The application displays the response
in the “Ping Result” box.
Figure 11-3. Ping Operation Window
11.1.1Updating the Ping Settings
To update the Ping settings:
1. Click the “Settings” pull-down window. The “Update Settings”
window appears (Figure 11-2).
