Hotspot
Hotspot configuration
LR54 User Guide
359
3.
or
Enable hotspot using the default configuration
4. Set the authentication mode to
hotspotsystem
:
(config)> network hotspot
hotspot_name
auth hotspotsystem
(config)>
5. Configure
HotspotSystem
:
a. Set the operator name that you registered with
hotspotsystem.com
.
(config)> network hotspot
hotspot_name
hotspotsystem operator
name
(config)>
b. Set the location ID of this hotspot.
(config)> network hotspot
hotspot_name
hotspotsystem location
value
(config)>
where
value
is any integer. The default is
1
.
6. Set walled garden settings.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. Include the domain or subnet of supporting servers for payment or
other external login and authentication (such as social media sites).
n
Add domains that can be accessed by the client prior to authentication:
(config network hotspot new_hotspot)> add walled_garden domains end
domain_name
(config network hotspot new_hotspot)>
Repeat to add additional domains.
n
Add IP addresses and subnets that can be accessed by the client prior to
authentication:
(config network hotspot new_hotspot)> add walled_garden subnets end
value
(config network hotspot new_hotspot)>
where
value
is an IPv4 address and optional subnet mask, using the format
IPv4_
address
[/
netmask
], or the keyword
any
.
Repeat to add additional IP addresses or subnets.
7. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
8. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
