Digi WR54 regulatory and safety statements
European Community - CE Mark Declaration of Conformity (DoC)
Digi WR54 Hardware Reference
27
Digi customers assume full responsibility for learning and meeting the required guidelines for each
country in their distribution market. Refer to the radio regulatory agency in the desired countries of
operation for more information.
CE mark (Europe)
The Digi WR54 is certified for use in several European countries. For information, visit
www.digi.com/resources/certifications
If the Digi WR54 is incorporated into a product, the manufacturer must ensure compliance of the final
product with articles 3.1a and 3.1b of the RE Directive (Radio Equipment Directive). A Declaration of
Conformity must be issued for each of these standards and kept on file as described in the RE
Directive (Radio Equipment Directive). Furthermore, the manufacturer must maintain a copy of the
(product name) user manual documentation and ensure the final product does not exceed the
specified power ratings, antenna specifications, and/or installation requirements as specified in the
user manual.
OEM labeling requirements
The 'CE' marking must be affixed to a visible location on the OEM product.
CE labeling requirements
The CE mark shall consist of the initials “CE” taking the following form:
n
If the CE marking is reduced or enlarged, the proportions given in the above graduated
drawing must be respected.
n
The CE marking must have a height of at least 5mm except where this is not possible on
account of the nature of the apparatus.
n
The CE marking must be affixed visibly, legibly, and indelibly.
