Digi Wi-Point 3G Application Guide
– Linksys VPN Connection
2/20/2009
Digi International
4 of 6
Linksys Configuration
1.
Configure the Linksys VPN device:
a.
Log into the web interface of the Linksys appliance, and navigate to the
VPN setup of the device.
i.
For example, in the device used for this example, Linksys RV042,
the VPN setup is located on the toolbar at the top of the screen.
b.
Click
Add New Tunnel
to add a new tunnel for configuration.
c.
Choose the option for
Gateway-to-Gateway
for the type of tunnel to be
built. Click
Add Now
to start the tunnel configuration.
d.
Fill in the appropriate information shown in the following screenshots:
