AT commands
SPI interface commands
Digi XBee® 3 802.15.4 RF Module User Guide
154
SPI interface commands
The following commands affect the SPI serial interface on SMT and MMT variants. These commands
are not applicable to the through-hole variant of the XBee 3; see
D1
through
D4
and
P2
for through-
hole SPI support.
P5 (DIO15/SPI_MISO Configuration)
Sets or displays the DIO15/SPI_MISO configuration (Micro pin 16/SMT pin 17). This only applies to
surface-mount and micro devices.
Parameter range
0, 1, 4, 5
Parameter
Description
0
Disabled
1
SPI_MISO
2
N/A
3
N/A
4
Digital output, low
5
Digital output, high
Default
1
P6 (DIO16/SPI_MOSI Configuration)
Sets or displays the DIO16/SPI_MOSI configuration (Micro pin 15/SMT pin 16). This only applies to
surface-mount and micro devices.
Parameter range
0, 1, 4, 5
Parameter
Description
0
Disabled
1
SPI_MOSI
2
N/A
3
N/A
4
Digital output, low
5
Digital output, high
Default
1
