Agency certifications
IC (Industry Canada) certification
XBee-PRO 900HP RF Modem User Guide
28
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement
Labeling requirements
Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label on
the outside of the final product enclosure must display one of the following text:
Contains IC: 1846A-XB900HP
The integrator is responsible for its product to comply with IC ICES-003 and FCC Part 15, Sub.
B-Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada
accepts FCC test report or CISPR 22 test report for compliance with ICES-003.
Antenna options: 900 MHz antenna listings
The antennas in the tables below have been approved for use with this product. Digi does not carry all
of these antenna variants. Contact Digi Sales for available antennas.
Antennas approved for use with the XBee-PRO 900HP RF Modem
Part
number
Type
Connector
Gain
Application
Cable loss or
power reduction
for S3B Radio
Omni-directional antennas
A09-F0
Fiberglass Base Station
RPN
0 dBi
Fixed
0dB
A09-F1
Fiberglass Base Station
RPN
1.0 dBi
Fixed
0dB
A09-F2
Fiberglass Base Station
RPN
2.1 dBi
Fixed
0dB
A09-F3
Fiberglass Base Station
RPN
3.1 dBi
Fixed
0dB
A09-F4
Fiberglass Base Station
RPN
4.1 dBi
Fixed
0dB
A09-F5
Fiberglass Base Station
RPN
5.1 dBi
Fixed
0dB
A09-F6
Fiberglass Base Station
RPN
6.1 dBi
Fixed
0dB
A09-F7
Fiberglass Base Station
RPN
7.1 dBi
Fixed
0dB
A09-F8
Fiberglass Base Station
RPN
8.1 dBi
Fixed
0dB
A09-F9
Base Station
RPSMAF
9.2dBi
Fixed
0dB
A09-W7
Wire Base Station
RPN
7.1 dBi
Fixed
0dB
A09-F0
Fiberglass Base Station
RPSMA
0 dBi
Fixed
0dB
A09-F1
Fiberglass Base Station
RPSMA
1.0 dBi
Fixed
0dB
A09-F2
Fiberglass Base Station
RPSMA
2.1 dBi
Fixed
0dB
