XBee-PRO 900HP RF Modem User Guide
The XBee-PRO 900HP RF Modem is a small, low-power solution that uses the XBee-PRO 900HP 900
MHz RF Module in an enclosure to communicate with systems using RS-232, RS-485, and USB
interfaces. It allows you to easily make your existing wired systems wireless simply by connecting to
this product.
When a system is connected to the XBee-PRO 900HP RF Modem, it can transmit and receive data from
multiple radios on the same wireless network. This is achieved by using Digi’s XBee-PRO 900HP RF
Module.
This manual is not a comprehensive manual that provides a full description of the 900HP RF Modem.
This manual only covers the interfaces needed to communicate with the XBee-PRO 900HP RF Modem.
For an extensive guide on use of the 900HP 900 MHz RF Module, see the
.
Features
The following table highlights the key features of the XBee-PRO 900HP RF Modem:
Long range data integrity
Low power
Range
Indoor/Urban: 200kbps: Up to 1000' (305 m),
10kbps: Up to 2000' (610m)
Outdoor line-of-sight: 200kbps: Up to 4 miles
(6.5km), 10kbps: Up to 9 miles (15.5km)
Transmit power: Up to 24 dBm (250 mW) (software
selectable)
Receiver sensitivity: -101 dBm (200kbps), -110 dBm
(10kbps)
RF data rate: 200kbps, 10kbps
Receive current: 60 mA (@9V)
Transmit current: 140 mA (@9V)
Advanced networking and security
Easy to use
XBee-PRO 900HP RF Modem User Guide
5
