AT commands
Command mode options
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
105
Default
0x3E8 (one second)
CC (Command Character)
The character value the device uses to enter Command mode.
The default value (
0x2B
) is the ASCII code for the plus (
+
) character. You must enter it three times
within the guard time to enter Command mode. To enter Command mode, there is also a required
period of silence before and after the command sequence characters of the Command mode
sequence (
GT
+
CC
+
GT
). The period of silence prevents inadvertently entering Command mode.
Parameter range
0 - 0xFF
Default
0x2B (the ASCII plus character:
+
)
