27
6.8.2 Assembling the arms
The arms are provided disassembled. To assemble them, follow the instructions
provided below:
The wrench used for assembling must be an Allen n.8 and the screw must be
tightened to the maximum to ensure good fixation. All three arms must be attached to
the same central upper point.
master
2° Make sure the mini
arm
’
s plastic part is
fitted in to the steel
part.
3° Fit the stainles steel
arm in the mini arm.
4° Fixate the screw inside
the mini arm using a Allen
n.8 wrench.
5° Put the arm back in to
its normal position.
1° Let the mini arm drop.
