ADAT Bridge I/O
36
In OMS Setup (Macintosh Only):
4
On your computer, open the OMS Setup
application and configure the BRC and
your MIDI interface. (If you choose Alesis
in the Manuf pop-up menu, and BRC in the
Model pop-up in this dialog, the appropri-
ate settings will be configured automati-
cally). In OMS’ MIDI Device Info dialog,
enable Sends and Receives MTC and MMC
for the BRC. You must have an OMS device
defined for the BRC if you haven’t already
done so. Click OK after configuring the
OMS Device Info window, then connect
the BRC to the appropriate MIDI port in
the OMS Setup Window.
5
Save the BRC/MIDI interface configura-
tion document as your current OMS setup.
In Pro Tools:
6
In Pro Tools, choose Setups > Peripherals
and display the Synchronization window.
From the Device pop-up, choose Generic
MTC Reader. From the Port pop-up, choose
BRC (on the Macintosh) or the appropriate
port of your MIDI interface (in Windows).
Alternatively, if the name of the (BRC)
OMS device does not appear here, choose
the serial port to which your MIDI interface
is connected.
7
In the Pro Tools Session Setup window:
• Set Channel 1–2 input to ADAT if the
ADAT Bridge is your primary interface, or
Analog if it is not your primary audio in-
terface.
• Set Pro Tools Sync Mode to ADAT Optical
(if the ADAT Bridge is not your primary
audio interface, choose Digital)
• Choose the sample rate and frame rate
that matches the material on the ADAT.
8
Create destination audio tracks for the
ADAT tracks to be transferred. Make sure
the destination tracks each have a different
Pro Tools voice assignment.
9
Use the Input Selector of each destina-
tion track to assign its input. When the
ADAT Bridge is your primary interface, In-
puts 1–8 correspond to the ADAT Bridge
I/O’s Group A inputs. Inputs 9–16 corre-
spond to ADAT Bridge I/O’s Group B in-
puts. If you have additional ADAT
Bridges/ADATs, assign their inputs as well.
10
Select a Pro Tools monitoring mode
(Auto Input Monitor or Input Only Moni-
tor).
11
Configure Pro Tools to display Time
Code.
12
Choose Setups > Preferences, then click
the Operations button to display the Oper-
ations Preferences dialog. Choose the de-
sired Pro Tools online recording mode:
Record Online at Time Code (or ADAT)
Lock, or Record Online at Insertion/Selec-
tion. If you are not familiar with these
modes, refer to the Pro Tools Reference
Guide.
Configuring the BRC in OMS
Summary of Contents for ADAT Bridge I/O
