ADAT Bridge I/O
52
Hardware Setup
Opcode’s Studio 64 XTC has Word Clock
Super Clock outs, ADAT Sync out, and
SMPTE in and out. Because the 64XTC has
only 256x & ADAT Sync Outs, it must al-
ways be the clock master in a Pro Tools sys-
tem. The following setup allows you to syn-
chronize your system with Pro Tools being
the positional/transport master.
To connect this setup:
1
Connect the ADAT Sync Out from the
64XTC to the Sync In on your primary
ADAT.
2
Connect the Studio 64XTC’s 256x Clock
Out to the Slave Clock (256x) In of your
primary audio interface (ADAT Bridge I/O
or other). If you have multiple audio inter-
faces, daisy-chain the Slave Clock signal as
described previously.
3
Make sure your 64XTC’s serial cable is
correctly connected to your CPU.
Software Configuration
Windows
If you are using the 64XTC on Windows,
you must first install the 64XTC drivers
and confirm that the device is operating
correctly. The 64XTC ports will appear in
Pro Tools as available sync sources/destina-
tions.
Macintosh
On the Macintosh, the 64XTC requires
OMS.
OMS Setup (Macintosh Only)
Before you begin, confirm that you have
installed and configured the 64XTC, and
that it is recognized by OMS (i.e., it is
shown in OMS Setup). Once the XTC is rec-
ognized by OMS, a “Studio 64 XTC” pull-
down menu appears in the OMS applica-
tion.
1
Add a new device and assign it to Port 5
(even though the 64XTC only has four
physical ports, configure this new device
for “port 5”). Refer to your OMS documen-
tation for details on creating an OMS de-
vice or assigning its port.
2
Name the device ADAT, and for MMC,
enable Sends and Receives. Nothing else
need be checked.
3
Click OK to close the New Device win-
dow. In OMS Setup, the 64XTC and ADAT
device should appear similar to the follow-
ing (your setup will probably include other
devices than the example shown below):
OMS Setup with an ADAT device defined and
configured to use “port 5”
Summary of Contents for ADAT Bridge I/O
