Chapter 3: Installing AVoption|V10
13
Connecting Analog Video Input
and Output
To connect the output of an analog video deck to
the AVoption|V10:
■
Using a BNC cable, connect the component
output of the video deck to all of the following:
• COMPONENT Y IN on the AVoption|V10
breakout box.
• COMPONENT R-Y IN on the AVoption|V10
breakout box.
• COMPONENT B-Y IN on the AVoption|V10
breakout box.
– or –
■
Using a BNC cable, connect the composite
output of the video deck to COMPOSITE IN on
the AVoption|V10 breakout box.
– or –
■
Using a 4-pin connector, connect the s-video
output of the video deck to S-VIDEO IN on the
AVoption|V10 breakout box.
To connect the analog video output from the
AVoption|V10 to an analog video deck:
■
Using a BNC cable, connect all of the follow-
ing to the component input of the video deck:
• COMPONENT Y OUT on the AVoption|V10
breakout box.
• COMPONENT R-Y OUT on the AVop-
tion|V10 breakout box.
• COMPONENT B-Y OUT on the AVop-
tion|V10 breakout box.
– or –
■
Using a BNC cable, connect COMPOSITE
OUT 1 or 2 on the AVoption|V10 breakout box
to the composite in of the video deck.
– or –
■
Using a 4-pin connector, connect S-VIDEO
OUT on the AVoption|V10 breakout box to S-
Video in of the video deck.
Connecting Digital Video Input
and Output
To connect the output of a serial digital video
source to the AVoption|V10:
■
Using a BNC cable, connect the serial digital
output from a digital video source to SDI IN on
the AVoption|V10 breakout box.
To connect the serial digital video output from the
AVoption|V10 to a digital video deck:
■
Using a BNC cable, connect SDI OUT 1 or 2 on
the AVoption|V10 breakout box to the serial dig-
ital input of the video deck.
Connecting a DV Device
To connect a DV device to the AVoption|V10:
■
Connect one end of the FireWire (1394) cable
to the DV port on the AVoption|V10, and con-
nect the other end to any available FireWire port
on the DV Device.
Connecting Optical for Audio
To be able to capture and play back audio with
Media Station|V10 software, you will need to
connect the OPTICAL In and Out of the AVop-
tion|V10 to the Optical In and Out of the pri-
mary Pro Tools|HD audio interface.
All analog video outputs are active during
capture and playback.
All Firewire decks and cameras that are
connected to AVoption|V10 must be pow-
ered on after powering on the AVop-
tion|V10.
