15
Vision-64 User Guide
Issue 1.02
Copyright
©
2002-2004 Digflex Pty Ltd
The keypad will display the following when chime mode is
turned off:
Reception Area A001
Chime Is OFF,
To Turn ON, Press ON.
To Go Back Press OK
The keypad will display the following when chime mode is
turned on:
Reception Area A001
Chime Is ON,
To Turn OFF, Press OFF.
To Go Back Press OK
3. Press the [ON] key to turn chime mode on, or, press [OFF]
to turn chime mode off.
4. Press the [OK] key to exit.
Areas > Area Properties >
Area Name
MENU 2-1-0
This menu allows you to program the name for each area. Each
area name can be programmed with up to 16 characters. At factory
default, only Area 1 is used. The Vision control panel can have a
maximum of 8 independent areas programmed.
1. Enter [MENU] + [2] + [1] + [0].
A list of different areas will display on the keypad.
2. Use the [
↑
] and [
↓
] keys to select the area that you want to
program the name, then press [OK] to select. Alternatively,
you can enter the area number that you want to program
the name, then press [OK].
The keypad will display the following:
Area Name A001
Area 1 Name
Press
◄►
OK to SAVE
3. Use the [
←
] and [
→
] keys to scroll the cursor left and right
across the area name text. Use the [
↑
] and [
↓
] keys to scroll
through the different characters available. To clear all text
from the cursor position to the right, press the [OFF] key.
4. When the user name is complete, press [OK].
INPUTS
Each Vision-64 control panel has up to a maximum 64 zones. 16
zones are available as standard with an additional 48 wireless zones
available when the optional radio received is fitted. Your installer
will advise you on the exact makeup and configuration of your
system.
Inputs > Commands >
Zone Status
MENU 3-0-0
This menu allows you to view the zone status of each zone (i.e.
Normal, Open or Short).
1. Enter [MENU] + [3] + [0] + [0].
A list of different zones will display on the keypad.
2. Use the [
↑
] and [
↓
] keys to select the zone that you want to
turn view the status information then press [OK] to select.
Alternatively, you can enter the zone number that you want
to view status information, then press [OK].
The keypad will display the following zone status information:
Zone 1 Name Z001
EOL=Normal 06523 ohms
Press OK or MENU
3. Press the [OK] key to exit.
Inputs > Commands >
Bypass Zones
MENU 3-0-2
This menu allows you to bypass or un-bypass a single or multiple
zones before you turn the area All On, Part On or Part 2 On. When
bypassing zones, it disables the ability for a zone to detect intrusion
and sound an alarm.
A burglary zone will automatically become un-bypassed when you
turn the corresponding area off (disarm). Any 24-Hr fire or 24-Hr
non fire zones will need to be manually un-bypassed.
1. Enter [MENU] + [3] + [0] + [2].
A list of zones that can be bypassed will display on the
keypad. A ‘√’ displayed on the right side of the zone name
indicates that the zone is already bypassed.
Z001 Zone 1 Name
Z002 Zone 2 Name
Z003 Zone 3 Name
Press
OK or MENU
2. Use the [
↑
] and [
↓
] keys to select the zone that you want to
bypass, then press [OK]. Alternatively, you can enter the
zone number that you want to bypass, then press [OK].
If the zone is bypassed, the keypad will prompt:
