Page 10
4
DISPLAY SCREENS
The are 3 main display screens on the Digifly Archimede plus:
- The Basic Display screen.
- The Advanced Display screen.
- The Navigation Display screen.
To switch between these 3 main display screens, press the
key.
5
BASIC FUNCTIONS
5.1
ALTIMETER
The Digifly Archimede Plus has 3 different altimeters: A1, A2, A3.
The altimeters can be shown in metric (mt) or imperial (ft) units. To change the units of
display. Press the
key, (function “ENT”) to select and then select (M-SET \ n. 26 U-
AL)” and change to “FT” or “MT”.
On the Basic Display page, the A1 (barometric altimeter) is the first altimeter shown.
Below the altimeter A1 is there the A2-A3 altimeter display . To switch between A2 or A3
press the
key.
To zero the A2 altimeter press the
key (long press).
The A3 altimeter is automatically zeroed when a thermal is found. There are 2
parameters that can be adjusted to allow the instrument to identify a thermal; the
change in height and the time over which the change in height occurs.
To set the thermal detection parameters, go to (ADVANCED SETUP \ n. 1 THEV) and
(ADVANCED SETUP \ n. 2 THET) to adjust the time over which a change in height is
required for detection of a thermal.
BASIC DISPLAY
ADVANCED DISPLAY
NAVIGATION DISPLAY