background image

 

Page 24 

ƒ

 

A successful connection is confirmed by a message with the serial number of your 

instrument. 

ƒ

 

Click the “Download Last Flight” or the “Download All Flights” button. 

ƒ

 

At the end of the download *.XLS  and  *.IGC files will be created in the VLTOOLS 
directory. 

ƒ

 

The “Download Last Flight” button will save last flight in two different file format  flight.igc  
and  flight.xls . 

ƒ

 

The “Download All Flights” button will save each flight  in two different formats (*.igc   and  
*.xls) with file name 01, 02, 03 etc. 

ƒ

 

Note: these files will be always 
overwritten so it's very important that you 
rename them after the download.  

ƒ

 

Files *.igc can be viewed on your PC with 
most IGC compatible software packages 

e.g. CompeGPS, MaxPunkte, GpsDump, 
Seeyou, Oziexplorer, etc. 

ƒ

 

Files *.xls can be read & edited by Excel 

program. 

ƒ

 

For more info read the Digifly Vltools user 
manual.  

 

8.2

 

CONNECTING WITH COMPETITION SOFTWARE 

ƒ

 

The Digifly Archimede Plus instrument can communicate and downloads flights with 

some of the commonly used competition software packages e.g. CompeGPS, 

MaxPunkte, GpsDump.  

ƒ

 

To communicate with a PC connect the optional PC serial cable or USB cable in to the 

left socket on the bottom of the vario, marked GPS. 

8.2.1

 

DOWNLOAD  A SINGLE FLIGHT TO COMPETITION SOFTWARE 

ƒ

 

To download single flights from your Digifly Archimede plus to your PC Competition 

software , enter the “LOGBOOK” menu on your instrument. 

ƒ

 

With up and down arrows, highlight the desired flight (without entering in it).  

ƒ

 

From the PC Competition software (CompeGPS, MaxPunkte, GpsDump) select “download 

flight track” using the protocol MLR 38400 baud. 

ƒ

 

The download can be stopped pressing the “ESC” key on the your Digifly Archimede plus. 

Summary of Contents for Archimede Plus

































Reviews: