Page 26
When the “Upgrade_xx_x_Archimede plus.exe” tools software is operating you will see a
the progress of the software.
The upgrade process take about 5 minutes and on completion, your PC will confirm with
a long “beep”.
Press the
key and disconnect the PC cable.
When you restart your Digifly Archimede plus the version number of the new software
you have just installed is briefly shown on the start up screen.
8.4
PROBLEMS CONNECTING TO YOUR PC
Problem : I attached the cable but the software do not connect
Solution :
A) Unplug the cable , download from our web site the driver installer (www.digifly.com -
>software -> " DIGIFLYNEXTGEN-USB Driver.zip” , run it on your PC than plug again the
cable.
How to Check the Driver Installation
1) Go to the Device Manager : Start -> Control Panel -> System -> Hardware -> Device
Manager
2) Click on the plus sign (+) next to "Ports."
3) If the device is installed properly, you will see "Prolific USB-to-Serial Comm Port.
(COMx)". Note that x is the number of the COM port assigned to the cable.
B) Look for a conflict with a another program or device and turn off firewall / antivirus
programs