Digifly Archimede, User Manual

Page 9 

ƒ

Below the altimeter  A1 is there the A2-A3 altimeter display . To switch between A2 or  A3  
press the 

  key. 

ƒ

To zero the A2, A3 altimeter press the 

  key (long press). 

4.2.1

ADJUSTING ALTIMETERS A1, A2, A3 

ƒ

Go to the altimeter menu “ALTIMETER” and select which altimeter 
(A1 or A2 and A3) you want to adjust. Move up and down using 
the arrow keys 

, 

 and press the 

 key (function “EDIT”). To 

adjust the altimeter value use the arrow keys 

, 

 and confirm 

with the 

 key (function “SAV”) or leave without saving with the  

  key (function “ESC”). 

ƒ

To reset the A1, A2, A3 altimeters to standard QNH (1013 mb), go 
to the altimeter menu “ALTIMETER”. Press the  

  central key 

(long press). A confirmation of “YES” or “NO” is required. 

ƒ

If the altimeters have been set in feet and the “ft” icon is blinking, 
the altitude indication is in tens of feet.  

4.3

VARIOMETER DISPLAY 

4.3.1

SUPERFAST INTELLIVARIO 

ƒ

The Intellivario is a revolutionary system designed by Digifly which is based on the use of 
sophisticated digital filters. This results in a very sensitive vario and is immune to radio 
interference. All the variometric functions are subject to these filters.  

ƒ

The Digifly Archimede has a very fast pressure sensor and an excellent data acquisition 
system that allows the instrument to perform as a very fast and accurate vario (updated 
20 times a second). 

4.3.2

VARIO REACTIVITY 

ƒ

To adjust the reactivity of the vario, go to (M-SET \ n. 5 RVAR). 

4.3.3

ANALOGUE VARIO  

ƒ

The long data field on the left of the display shows the analogue vario value. 

ƒ

The analogue vario is an instantaneous vario reading. This information is shown on the 
analogue display on the left of the screen by a bar graph, indicating lift or sink. 

ƒ

The scale of the analogue vario can be adjusted by setting parameter (M-SET \ n. 7 
FS_V) to 1, 6, 12 m/s.