10
The ‘Digigram LoLa Manager’ control panel
This graphical interface allows you to make the most of the embedded routing
and mixing functionalities of the LoLa sound card in the most simple and
intuitive way. It gives access to a matrix providing the features described
underneath. To launch this interface, go to <Start>, <Programs>, <LoLa>,
<LoLa Manager>.
Inputs:
•
8 analog inputs of the LoLa with the following features on each
input:
- analog input gain with input peak meter, solo and mute, and AGC
(Automatic Gain Control)
- routing of the input signal after gain, solo, mute, and AGC towards
one or both output channels for monitoring
- routing of the input signal after application of gain, solo, mute, and
AGC towards one or several recording channels
•
8 audio input streams coming from applications, with the following
features:
- digital gain with peak meter, solo, and mute
- routing of the audio stream after application of gain, solo, and mute
towards the two output channels for monitoring
All input signals assigned to the same output (monitoring,
recording) are mixed. The result of this mix is sent to the output.
Outputs:
•
2 analog outputs of the Lola280 (monitoring), each providing the
following features:
- Digital gain, peak meter, analog gain
•
8 recording channels featuring:
- digital gain applied to the signal to be recorded, peak meter
For help on how to use this control panel, please refer to its on-line help.