12
encoding/decoding is disabled). To access this control panel, go to <Start>,
<Programs>, <Digigram>, <Digigram Control Center>. For detailed
information on how to use the Digigram control panel, please refer to its online
help (“? Help” button).
Removing the driver under Windows XP and Windows
Server 2003
•
Open the Windows Control Panel and double-click on the
Add/Remove Software icon.
•
Select “
Digigram HR Runtime …”
, and Change/Remove.
•
Select Remove in the HR Runtime window.
•
Follow the instructions to finish to remove the driver.
Removing the driver under , Windows Vista, Windows
Server 2008, and Windows 7
•
Open the Windows Control Panel and double-click on the
Programs and Features icon.
•
Select “
Digigram HR Runtime for Vista…”
, and Change/Remove.
•
Select Remove in the HR Runtime window.
•
Follow the instructions to finish removing the driver.
How to check the installation
Once the cards and the driver have been installed according to the procedure
described in this manual, you can verify that the card is properly installed and
works fine as follows:
•
Menu <Start> <Settings> <Control panel>, <Sound and
Multimedia>, tab “Audio”, Default device (Playback device,
Recording device). The card’s channels can be selected. The card can
be used with any
DirectSound
application.
Available WDM devices are:
•
PCX442HR/e (PCX422HR/e, PCX440HR/e) 1+2 (WDM)
(
record and playback
)
•
PCX442HR/e (PCX440HR/e) 3+4 (WDM)
(
record and
playback
)
•
PCX422HR/e 3+4 (WDM) (
playback only
)
•
The card is also visible via the np interface: go to <Start> <Programs>
<Digigram> and select <Digigram Control Center>.
