VX1220HR, VX1221HR & VX1222HR
User’s Manual
7
HARDWARE REQUIREMENTS
Minimum requirements
•
Pentium III minimum (or equivalent)
•
128 MB RAM
•
One free PCI or PCI-X slot (5 V or 3.3 V)
Software requirements
To use your VX1220HR, VX1221HR or VX1222HR, install the driver from the
np Runtime HR package version 1.01 or higher. This package includes a
WDM DirectSound driver. The Microsoft DirectX runtime version 9 or higher
must also be installed on your computer.
The cards can also be used with applications based on Digigram’s np SDK.
The card is visible through the np interface and the DirectSound interface.
HR Runtime also includes a
Wave
and an ASIO driver.
Supported operating systems
VX1220HR, VX1221HR, and VX1222HR cards run under Windows 2000 and
Windows XP.
HARDWARE INSTALLATION
The card has to be installed in the computer prior to installing its driver.
Installing the card
Gently plug the card in a free PCI slot and press it down to position it firmly.
Tighten the screw.
Interrupt and memory address
Hardware interrupt and addresses are automatically set up at start-up by the
PCI PnP BIOS.
SOFTWARE INSTALLATION
Please visit the Digigram web site at www.digigram.com for the most recent
driver.
In case you run a specific application developed or installed by a Digigram
Partner, this application might require the use of a specific driver version. In
this case, make sure that the updated driver has been approved by your
supplier.
