VX442
User’s Manual
11
VX442 CONTROL PANEL
The VX442 control panel allows to set the parameters of your VX442 card:
sampling frequency, levels, latency, digital data format, SCMS management…
On Mac, the VX442 panel can be found in
<Apple menu> <Control panels>
.
On PC, open
<Start> <Settings> <Control panel> <Digigram VX442 H/W
>.
Monitor mixer
The Monitor Mixer is the first page that appears when the VX442 Control
Panel is opened, and controls the digital mixer embedded in the VX442’s PCI
controller chip. The output of this mixer may be assigned to the
OUT1/OUT2
analog outputs and/or the
AES/EBU Out
digital output. At the same time, the
mixer outputs may be recorded in stereo as software files, just as if they were
additional inputs of the card.
The Monitor Mixer page is essentially a collection of volume level faders,
audio level (or ‘peak’) meters, and solo/mute controls. For each mixer output
and input channel there is one of each: a volume fader, a peak meter, a solo
control, and a mute control.
