protection up to ±30 V and has 16 bits of resolution and a bandwidth of 50 kHz. OpenLogger can then log all data onto
the local SD card at 400 kS/s, stream and/or log data over USB at 200 kS/s, or stream and/or log data over WiFi at 10 kS/S.
The analog inputs has the following features:
8 Channels
16 bits of resolution per channel
500 kS/s aggregate input
50 kHz bandwidth at -3 dB
Information on how to use the OpenLogger's Analog Inputs can be found in the OpenLogger's
Data Logger
tutorial.
The OpenLogger has a single channel 2 MS/s, 10-bit function generator. An R2R resistor ladder with 1% resistors is used in
place of a DAC.
The function generator supports:
Sine, triangle, sawtooth, square and DC outputs
10-bit resolution
1 Hz to 200 kHz frequency
3 V pk2pk output with ±1.5 V offset
20 mA output current
Information on how to use the OpenLogger's Function Generator can be found in the OpenLogger's
Function Generator
tutorial.
Function Generator
