Page3
then “
#
”
6 Press “
#
” two times.
First
“
#
”
“
Beeps
”
twice, lock status as above
Second
“
#
”
“
Beeps
”
three times, Guest TM
Key User adding is complete.
7 Wait 15 seconds, or press
“
#
”
, to exit.
Long “Beep”, indicator light switches off.
Under this Mode, use the
TM Key
to open the door directly.
Opening the door:
Operating instructions
Lock status
1 Place the TM Key close to the
inductive area.
Keypad lights up, blue unlock indicator light, with one “Beep”
Lock motor activates, turn the handle to open
2 After 5 seconds
“Beeps” twice, red light flashes twice, door locks, indicator light
switches off.
3.6.
Add Code&TM Key User
3.61 Prior to adding the Code&TM Key User:
3.611 Write down the User Group, (001-200)
3.612 Prepare the TM Key, and Code.
3.613 User groups correspond to the guest Code&TM Key.
Several guest Code&TM Key’s cannot be set under one group.
Identical guest Code&TM Key’s cannot be used with different groups.
Operating instructions
Lock status
1 Press
“
#
”
to start the lock
“Beeps” twice, keypad lights up, blue indicator
light flashes.
2 Input the
“
Master Code
”
then
“
#
”
Lock status as above
3 Within
ten seconds
(before the indicator light
switches off) input “
01
” then “
#
”
Lock status as above
4 Within
ten seconds
(before the indicator light
switches off) input “
Group No.
” then “
#
” (Group
No. can’t be reused.)
Lock status as above
5 Within
ten seconds
indicator light switches off,
input the “
Guest Code
” then “
#
”
Lock status as above
6 Within
ten seconds
indicator light switches off,
bring the “
TM Key
” close to the inductive area,
then “
#
”
Lock status as above
7 Press “
#
” 2 times.
First
“
#
”
“
Beeps
”
twice, status as above
Second
“
#
”
“
Beeps
”
three times, Guest Code
User adding complete.
8 Wait 15 seconds, or press
“
#
”
, to exit.
Long “Beep”, indicator light switches off.
Note: Set the Code first, and then the TM Key.
Under this Mode, use the
TM Key
together with the
Code
to open the door.
Opening the door:
Operating instructions
Lock status
1 Get the
“
TM Key
”
close to the
inductive area.
“Beeps” twice, keypad lights up, blue light flashes.
2 Input the “
Guest Code
”
then “
#
”” Keypad lights up, blue unlock indicator light, with one “Beep”,
motor activates, turn the handle to open
3 After 5 seconds
“Beeps” twice, red light flashes twice, door locks, indicator light