background image

27

Timer Recording

For timer recordings, clock, date, and stations must be set correctly. 

Load a cassette with its safety tab in place and with sufficient free space for the recording.

Call up the player’s "SETUP" menu and, choose "TIMER
PROGRAM".
Decide  if  you  want  to  record    "ONCE",  "WEEKLY"  or
"DAILY"...
... and confirm.

1

Type in one after the other: 
•  The programme location number;
•  the time the broadcast starts,
•  the time the broadcast ends, 
•  the day of the broadcast, if it is not today. 
•  Select LP if you wish to make a long play recording .
•  Switch off VPS/PDC here if you need to .

2

If you wish to make changes:
Move to the position you want to change using the  [

œ

œ

/

√  

]

buttons. Change the setting using the [PR+/- ] or [number]
buttons.
If all settings are ok, press [

œ

œ

or 

], till you see “OK :

CONFIRM” in the bottom line.
Confirm.

3

Switch your player off.

• Wait a few seconds after typing a one-digit-number.

• If you have made a mistake, move to the position you want to change using the [

œ

œ

/

] buttons

and change the setting.

• If programme timings overlap, the machine will give a warning message. If you don’t adjust

the times, the machine will record the first programme completely then continue with the
second one.

• If there is no sufficient free space for the recording on the cassette the video switches

automatically to “LP” for double recording capacity. 

• The recorder will eject cassettes which have the safety tab removed.
• The player will be powered on and record the program at the set time.
• If the player is powered on after a timer recording has been set, the player cannot record in

VCR mode but can record in DVD mode.  

PR+/-:SELECT(AV1/AV2)

0-9  :SETUP(PR)

/

:CORRECT   SETUP:END

PR

--

START TIME

--:--

END TIME

--:--

START DATE

--/--

TAPE SPEED

SP

VPS/PDC

ON

TIMER  PROGRAM (ONCE)

PR

01

START TIME

18:10

END TIME

20:30

START DATE

20/05(FRI)

TAPE SPEED

LP

VPS/PDC

ON

PR+/-:SELECT(AV1/AV2)

0-9 : SETUP (PR)

/

:CORRECT

OK:CONFIRM           SETUP:END

TIMER  PROGRAM  (ONCE)

HOW OFTEN DO YOU WANT

TO RECORD THIS PROGRAM?

PR+/-:SELECT
OK:CONFIRM       SETUP:END

ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)

Normal timer recording

VCR

O

peration

DC-B8E11P-DA  2005.9.22 9:42 AM  ˘

`

27

Summary of Contents for DVDVCR

































































Reviews: