1. Click on “INTERNET PORT” and choose your WAN type (e.g. PPPoE). Enter your
“User Name” and “Password” to dial up the dynamic IP address. Press save
after you set up.
2. Press “LOCAL PORT” and set “Start IP address” and “Number of IP address”. (For
example, if the IP address of your Video Web Server is 192.168.1.10, then 10 is
excluded from the setting range) Press save after you finish setting up.
3. In the “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set the “Port
Number” to 80 for the Video Web Server. Set the “Local Server IP Address” to
192.168.1.10. (The default Video Web Server IP and port). Press add & save after you
set up.
-20-
digimerge
