14
Record Method
This feature is used to select the DVR record method as either EVENT / NORMAL / OFF.
1. Press
▲
/
▼
to select the desired time camera channel (1-9), then press
ENTER
.
2. Press
◄
/
►
to select the
Record Method
feature on the screen.
3. Press
▲
/
▼
to select
EVENT
/
NORMAL
/
OFF
on the screen.
EVENT
: When the alarm input is triggered, the DVR will increase the recording time to that channel.
i.e. the normal record sequence for cameras is Camera 1, Camera 2, Camera 3 etc. In Event mode,
when an alarm in triggered from channel 1, the DVR will record using the following sequence: Camera 1,
Camera 2, Camera 1, Camera 3, Camera 1, Camera 4 etc.
NORMAL
: When an External Audible Alarm is triggered, the DVR will record normally as set up.
OFF
:
An Alarm Trigger will not cause the DVR to start recording.
4. Press
MENU
to confirm and exit the
Record Method
feature.
5. Press
MENU
again to exit the Camera Setup Option