background image

10 

System Set Up 

 
The system menu is used to configure the system level options of the DGR109… 
 
To access the System features, press 

MENU

 followed by the 4-digit password. Use the 

 / 

 to scroll to the ‘System’ option 

and press 

ENTER

 

 

 
 
 
Using the 

 / 

 buttons, scroll to the desired option and press 

ENTER

 to select it. 

Selecting the Audio Input Channel 

 
This Feature is used to select the audio channel to record. To set this Audio Input Channel: 
 

1.  On the System screen,

 

press 

 / 

 to select Audio Input, then press 

ENTER

2. Press 

 / 

 to select the desired time audio channel (1-4) 

3. Press 

MENU 

to confirm your change. 

4. Press 

 / 

 to move to another field on the System screen or press 

MENU 

to exit. 

Setting the Internal Audible Alarm Buzzer 

 
To enable or disable the internal audible alarm buzzer: If enabled, the buzzer will sound when the external alarm input is 
activated. 

 

1.  On the System screen,

 

press 

 / 

 to select Internal audible alarm buzzer, then press 

ENTER

2. Press 

 / 

 to enable or disable the internal audible alarm buzzer. Options are: 

ON 

= Buzzer is on. When the DVR detects an alarm, the system sounds the internal buzzer to alert the user. 

OFF 

= Buzzer is off. 

3. Press 

MENU 

to confirm your change. 

4. Press 

 / 

 to move to another field on the System screen or press 

MENU 

to exit. 

Setting the External Audible Alarm device 

 
To enable or disable the External Audible Alarm Device: 

 

1.  On the System screen,

 

press 

 / 

 to select External Audible Alarm Device, then press 

ENTER

2. Press 

 / 

 to enable or disable the External Audible Alarm Device. Options are: 

ON 

= External Device is on. When the DVR detects an alarm, the system triggers the external audible alarm. 

OFF 

= External Device is Off 

3. Press 

MENU 

to confirm your change. 

4. Press 

 / 

 to move to another field on the System screen or press 

MENU 

to exit. 

(SYSTEM) 
Audio Input:    

Int Audible Alarm:    

ON 

Ext Audible Alarm:   

ON 

Motion Audible Alarm:  ON 
Alarm Duration: 

10 SEC 

Dwell Time: 

02 SEC 

Message Latch: 

NO 

Title Display: 

ON 

Time Display: 

Y/M/D

 

2003-JAN-02 (THU)  

17:37:09 

New Password:  

XXXX 

Clear HDD:  

NO 

System Reset:  

NO 

Remote Mode:  

RS-232 

Baud Rate:  

9600 

Remote ID:  

000 

Summary of Contents for DGR109





































Reviews: