Please visit our website:
WWW.DIGIMERGE.COM
for a copy of the complete installation
manual and other support material. This is
also contained on the included CD-ROM.
DGRT400 (DVS) Quick Install Guide
System requirements
The following are minimum system requirements for an operator’s
PC sufficient to run
Digimerge DVS
client software:
•
Desktop or notebook PC with Intel Pentium™ 90 MHz or
compatible CPU.
Pentium II™ MMX™ 300 or better CPU is
recommended for optimal system performance.
•
32 MB of system RAM (64MB for
Windows NT).
More memory is recommended for improved
overall system performance.
•
Microsoft® Windows® 95, Windows® 98,
Windows NT™ 4.0, Windows® 2000,
Windows® XP.
•
Any Windows -compatible modem (internal or external). 57.6 Kbps modem is recommended.
•
Display adapter configured for 16-bit or better color mode (
32768
or more colors)
at
800x600
or higher resolution.
•
5 MB of free space on system hard disk are required for standard software installation.
Additional free space is required to store individual still images and image sequences.
Hardware Installation
1. First, you should make the appropriate DIP-switch
SW
settings on the back panel of unit. All possible operation
modes are tabulated:
SW position
Operation Mode
Internal modem
Aux mode
Internal modem (standard)
ON
OFF
Direct cable connection (COM-port)
OFF
ON
Custom configuration (external modem)
OFF
OFF
Auxiliary (reserved)
ON
ON
2. Provided that you will use device with internal modem configuration, connect the telephone line (RJ11 plug) to the
Line
connector on your
DVS
unit. If the same line is also to be used for as a regular telephone line or to connect a
fax machine, then use the
Phone
connector on the
DVS
. In that case, you may need to adjust (increase) the number
of rings after which the
DVS
will respond to an incoming call in order to avoid conflicts with normal phone and/or
fax usage and the associated inconveniences.
3. Next, connect one or more video cameras to any of the 4 BNC connectors on the back panel of the
DVS
box. The
DVS
is capable of camera auto-detection so you are free to use any of the unit ’s video inputs in any order. You may
also safely mix color and black & white cameras, as long as they all conform to the same electrical and video
standard (NTSC or PAL).
