47
SETUP CAMERA FOR REMOTE VIEWING
See the following instructions to setup the camera for remote viewing over the internet:
1.
NETWORK
CONFIGURATION SETTINGS (Page 47)
2.
VIEWING THE CAMERAS (Page 47)
NETWORK CONFIGURATION SETTINGS
PROCEDURE
Click on the Setup icon
, a small setup window s will appear.
Press OK to continue.
NOTE
If you are using the Port Forwarding, you should forward 4 serial ports
from the set port number.
Example:
Set Port Number: 5000
Ports to be Forwarded: 5000, 5001, 5002, 5003.
VIEWING THE CAMERAS
PROCEDURE
To start viewing the cameras press the connect icon
.
Enter the DVR IP address (i.e. 192.168.1.5)
Enter the DVR Port (i.e. 5000)
Set the User ID (i.e. admin, Max. 5 digit)
Set the video format (NTSC/PAL).
If you are logged on as Admin User, set the ID and
Password for Admin User and the password for the
Guest.
