Figure 1.0
BNC Video & RCA Audio
S-Video & RCA Audio
VGA IN (PC)
Start Up Operation
1. After all connections have been made as shown above, toggle the main power switch on the side
of the monitor to ON.
2. Press the POWER button on the front of the unit to turn on the display.
3. Press the MODE button to choose between NTSC or VGA depending on your desired operation.
4. If using NTSC mode, use the CH SELECT button to select the switch between Input 1, Input 2, or
S-Video.
5. If required, adjust the video settings using the On Screen Display (OSD) which is assessed by
pressing the MENU button.
See the following section for a full description of the front control buttons.
7
