DNZ930W_Quick Installation Guide_En_R1
w w w
.
d i g i m e r g e
.
c o m
Page
iv. Connect the safety cable (not included) - make
sure the Camera is secure.
v. Connect the Power and Ethernet cables
(necessary) and any optional connection cables
to the Camera before inserting into the Ceiling.
vi. Insert the Camera Base into the ceiling hole.
Secure the Camera to the Ceiling Mounting
Ring using the three (3) provided screws.
vii. Twist on the Plastic Bracket Cover.
1B. Surface Mounting
Before starting the Mounting procedure, confirm
that the ceiling can hold the weight of the camera.
A Safety Wire (not included) is required.
i. Affix the Base to the Camera (if detached).
ii. Drill holes into the ceiling:
• Use the provided “Installation Template -
Attached Type” to drill the screw holes.
• Use the drywall plugs and screws, or machine
screws and bolts to install the ring to the ceiling.
iii. Connect the safety cable (not included) - make
sure the Camera is secure.
iv. Connect the Power and Ethernet cables
(necessary) and any optional connection cables
to the Camera before attaching the Base Cover.
v. Use the Plastic Base Cover to shield the
installation. Attach securely with three (3)
screws (provided).
HARDWARE MOUNTING
1
Continued
4i
4ii
