USER’S MANUAL
40
MENU SETUP
6.1.5 PRE RECORD TIME
Select the desired time for pre-recording using the (-), (+) buttons.
When video loss, alarm or motion is detected, the DVR will store pre-recorded data during the
selected time.
The pre-recording time can be set from 0 second to 5 second and the default is “5”.
6.1.6 POST RECORD TIME
Select the desired time for post-recording using the (-), (+) buttons.
When video loss, alarm or motion is detected, the DVR will store post-recorded data during the
selected period.
The post-recording time can be set from 0 second to 60 second and the default is “10”.
6.1.7 IMAGE QUALITY
Select the desired image quality using the (-), (+) buttons.
There are 3 kinds of image quality.
Please refer to chapter 6.3 RECORD.
6.1.8 AUDIO RECORD
Select “ON” or “OFF” using the (-), (+) buttons to record audio.
6.1.9 REMOTE CONTROL ID
Refer to 6.5.6
NOTE:
The pre- and post- recording is not valid in normal recording mode.
NOTE:
Divide event type into three classes(
alarm, loss, motion).
