12
www.digiop.com
SECTION 3: SYSTEM SETUP
Table 6. Menu Items in Recording Mode Setup
Menu Item
Description
CHANNEL
Highlight the field with the
p
q
buttons, use the
t
u
buttons to display a channel you want, then press
SEL
. You can also
highlight and select the submenu button to open the RECORD PROPERTY window.
In the RECORD PROPERTY window, use the
p
,
q
,
t
, and
u
buttons to highlight a parameter, press
SEL
, use the
p
,
q
,
t
,
and
u
buttons to change the parameter value, then press
SEL
. Highlight the
OK
button and press
SEL
to confirm the settings
and close the window
.
RESOLUTION
Select either CIF, Half D1, or D1 using the
p
,
q
,
t
, and
u
buttons.
FRAME RATE
Set the frame rate for the specified channel. The sum of the frame rate values from each channel cannot exceed the maximum
frame rates for a specific recording resolution. The maximum video frame rate is 120 fps.
QUALITY
Select the recording quality for the specified channel. Options are: Network, Standard, High, Superior and Ultra.
RECORDING
Assign the recording mode for each channel. Options are: Continuous, By Motion, By Sensor, By Schedule, or Disable.
PRE RECORD
Enable/disable pre-event recording. Pre-event recording time is 5 seconds (video from 5 seconds before the event is recorded
with the eventt). Only intra-frames are recorded during pre-event recording.
