13
H.264 DVR User Manual
SECTION 3: SYSTEM SETUP
13
Menu Item
Description
POST EVENT RECORD
Set the post event recording time duration for the specified channel. (10 ~ 30 seconds)
SENSOR RECORDING
Enable setting up to 4 sensors for the specified channel using the
p
,
q
,
t
, or
u
buttons.
AUDIO
Enable/disable audio recording for the specified channel. Available only on channel 1 through channel 4.
SCHEDULE
Set the recording schedule. Press
SEL
to open the SCHEDULE window. .
3.3.1 Recording Schedules
To setup a recording schedule, select SCHEDULE in the RECORD menu. Navigate through the items using the
p
,
q
,
t
,
and
u
buttons.
[CHANNEL]: Select the specific channel.
[SETUP]: Use
p
and
q
buttons to highlight a record type (None, Continuous, Motion, Sensor), then press
SEL
to select it. Use the
p
,
q
,
t
,
and
u
buttons to highlight a timeslot in the schedule, then press
SEL
to apply the record type to that timeslot. Repeat
this to apply other record types to other time slots. Select the ALL option to apply the schedule to all cameras channels. You can
select or deselect any option by clicking it with a mouse, and you can select a block of timeslots by clicking and dragging the mouse
across them. Timeslots are color coded for the record type applied to them: CONTINUOUS - green, MOTION - yellow, and SENSOR -
red, None - white.
[COPY Schedule]: To copy the schedule setup on channel 1 to channel 2, select the channel 1 schedule, select COPY using the
p
,
q
,
t
,
and
u
buttons, select CH2 using the
p
,
q
,
t
,
and
u
buttons, then press the
SEL
button.
To return to
SETUP
menu screen, press the
ESC
button.
