22
www.digiop.com
SECTION 3: SYSTEM SETUP
Item
Description
NTP
NTP
(Network Time Protocol): Use to synchronize the clocks of computer systems over variable-latency data networks.
PRIMARY SNTP SERVER
: Use the virtual keyboard to enter the address of the primary NTP time server.
SECONDARY SNTP SERVER
: Use the virtual keyboard to enter the address of the secondary NTP time server.
TIME ZONE
: Select the offset from GMT (Greenwich Mean Time).
CONNECTON MODE
: Select an NTP time server connection mode (INTERVAL/TIME).
INTERVAL
: Synchronize the clock by hours shown on the connection period option.
TIME
: Synchronize the clock at the time daily shown on the connection period menu. CONNECTION PERIOD: 1 ~ 24.
3.7 SECURITY menu
Clicking the
SECURITY
tab opens the security menu. Navigate through the menu items using the
p
,
q
,
t
,
and
u
buttons, press
SEL
to select the item, use the
p
,
q
,
t
,
and
u
buttons to change the value, then press
SEL
again to confirm that value. Move to
the next item you want to change using the the
p
,
q
,
t
,
and
u
buttons. To return to setup menu screen, press the
ESC
button.
NOTE
You must be a user with
Admin
permissions to configure the SECURITY menu.
