DigiPos DS-810, User Manual

16

17

This feature allows experienced users to see exactly what data is coming to the printer. This can be 
useful in finding software problems.
When you turn on the hex dump function, the printer prints all commands and other data in 
hexadecimal format along with a guide section to help you find specific commands.

To use the hex dump feature, follow these steps
1. After you make sure that the printer is off and Dip s/w 1-2 is ON, turn on the printer.
2. Run any software program that sends data to the printer. The printer prints “Hexadecimal Dump” 
and then all the codes it receives in a two-column format. The first column contains the hexadecimal 
codes and the second column gives the ASC

Ⅱ 

characters that correspond to the codes.

Hexadecimal Dump
1B  21  00  1B  26  02  40  40  .!..& . @ @
1B  25  01  1B  63  34  00  1B  .%.. c4 ..
41  42  43  44  45  46  47  48  ABCDEFGH

□

 A period (.) is printed for each code that has no ASC

Ⅱ

equivalent.

3. Turn off the printer, and make sure that Dip sw 1-2 off.
4. Turn on the printer.

5. Hexadecimal Dump

6. Specifications

Appendix A : Specifications

6-1. General Specifications

(1) Printing Method 

Direct line thermal printing.

(2) Print speed 

160mm/sec

(3) Dot density    
 

180 DPI (Hor / Ver)

180 / 180 (0.142mm / 0.142mm dot)

203 DPI (Hor / Ver)

203 / 180 (0.125mm / 0.142mm dot)

                    
(4) Printing Width      
  

180 DPI 

Max 72mm (512 dots)

203 DPI 

Max 72mm (576 dots)

              
(5) Number of print columns. 
 

             No. of columns

Font “A”

Font “B”

180 DPI

42

56

203 DPI

48

64

 
(6) Roll paper 

Refer to chapter 2 for details on the recommended roll Paper.

Paper width : 50mm~82.5mm 

Roll diameter : Max. Ø80mm 

(7) Weight   

3.75 lbs (1.7Kg)