DIGIQUEST
30
Formatting the memory will result in the loss of all data/files
contained on it.
Note:
The manufacturer is not responsible for any
damage or loss of data.
Broadcasters may decide to prohibit recording due to copyright
issues. Check if the broadcaster is broadcasting or if there are any
signal problems.
Some files are not recognized
The manufacturer cannot guarantee the playback of the files even
though the extension is supported: this depends on the Codec
used, the data bit rate and the resolution.
Any codec update is the
responsibility of the main board manufacturer, it is not possible to
do it via SW.
The decoder or TV turns itself off
As required by recent European energy saving regulations, this
decoder will AUTOMATICALLY TURN OFF 3 hours after the last
operation, TVs after 4 hours (autostandby). NOTE: you can disable
this function in the relevant menus.
NOTE
: you can disable this function in the relevant menus.
NOTES:
Specifications are subject to change without notice.
The contents of the manual may differ from the product or software provided
and is subject to change without notice.
New software may change some features of the receiver.
All applications reproduced and the related trademarks belong to their
respective owners.
In case of incorrect, incomplete or erroneous or mere transcription errors
supplier (distributor) will be relieved of any responsibility and can refuse
performance of the obligation related to the error.
Due to updates or errors, the contents of this manual may not exactly match
the actual product. Please refer to www.digiquest.it for further information or
contact technical support info@digiquest.it
