DG-GS1510PL User Manua
l
Page 41
7.
vendor-specific information, the users typically do not need to modify this field.
8.
NAS ports, NAS port type, NAS type of service, these three values do not change in general.
9.
Whether to on or off the roaming feature of Radius.
Figure 41 the Radius configuration page
（
2
）
802.1x Configuration Page
Figure 42 is the 802.1x configuration page, users can configure 802.1x related information
on this page, including:
1.
Whether to activate the 802.1x protocol, when doing authentication and accounting must
be to start 802.1x protocol.
2.
To adopt a common authentication method or the expansion of authentication.
3.
Whether to open re-authentication function, the default is not open . Open the
re-authentication feature will make users more reliable when using the authentication and
accounting, but it will slightly increase the network traffic.
4.
Setting re-certification time interval, only to re-open the case of authentication to be valid,
the default is 3600 seconds, when you do authentication and accounting based on the actual
situation to set the value.
5.
Quiet Period Timer, users typically do not need to modify this field.
6.
Tx-Period Timer, users typically do not need to modify this field.
