DG-HR3420 User Manual
34
Channel width
Select any channel width from the pull-down list.
Control sideband
There are two bands upper and lower. The upper band
comprises of channel numbers from 5 to 11. The lower band
comprises of channel numbers from1 to 7.
Channel number
Select the channel number form the list. You can choose any
channel number you want to use, and almost all wireless
clients can locate the channel you are using automatically
without any problem. However, it is still useful to
remember the channel number you use, some wireless client
supports manual channel number select, and this would help
in certain scenario when there is some radio communication
problem.
Radio Power
(Percent)
You can choose the transmission power of the radio signal.
The default one is 100%. It is recommended to choose the
default value 100%.
Associated clients
Click ‘
Show Active Clients
’ button, then an “
Active
Wireless Client Table”
will pop up. You can see the status
of all active wireless stations that are connected to the
access point.
When you finish with all settings, press ‘
Apply changes
’.