DVM-500Ultra Installation Guide REV B
Page 11
STEP 5:
DVM Connections
Attach the following cables to the back of the DVM:
GPS, MAIN CABLE HARNESS, A/V Out,
and
AUX CAM (front camera).
Also, connect the
USB
if the wireless option was purchased. To
help minimize vibration to the DVM connections, attach a tie wrap as shown below.
STEP 6
:
Mount the DVM-500Ultra and Interface Box
Attach your DVM to the vehicle and neatly secure all cabling using tie wraps. Examples are
illustrated below.
The interface box is usually mounted near the DVM, away from other police equipment. It is
recommended that this be mounted in a location where it can be accessed later if necessary. It is
required that the I/O box is not placed where there is a possibility of moisture.
To minimize the effects of RFI within the vehicle, mount the interface box away from all
other police equipment.
Attach tie wrap here
