LIVEMIX MIX-16/32
8
LIVEMIX SYSTEM EXAMPLES
A Livemix system requires either an analog (AD-24) or digital input (option card), the MIX-16/32
central mixer, and at least one CS-DUO personal mixer. Below are some examples of what a basic
system may look like.
ANALOG OR DIGITAL?
Users receiving their audio from an analog source will use the AD-24. Using the TRS or DB-25 inputs,
audio from the source is made available to the Livemix system.
Users receiving their audio from a digital source will use the Option Card (LM-DANTE-EXP). This is
an option card that is installed in the MIX-16/32 and allows the Livemix system to receive audio from
a digital device or network.
CONTROL SURFACE
Livemix needs at least one connected personal mixer to make a mix. Each Livemix CS-DUO personal
mixer connects via CAT5/CAT6 cable to one of the ports of the MIX-16/32. Using various controls on
the unit, two users can each create their own custom mix, which is then output to headphones, in-ear
monitors or stage monitors, right from the CS-DUO unit.
ANALOG INPUT SYSTEM
1 x AD-24 Analog Input Rack Unit
1 x MIX-16 Central Mixer
4 x CS-DUO Dual Mix Personal Mixers
4 x MT-1 Dual Position Mounts
1 x CBL-CAT6-100 Shielded CAT6 Cable 100’ **
4 x CBL-CAT6-50 Shielded CAT6 Cable 50’
DIGITAL INPUT SYSTEM
1 x MIX-16 Central Mixer
1 x LM-DANTE-EXP Dante option card
4 x CS-DUO Dual Mix Personal Mixers
4 x MT-1 Dual Position Mounts
1 x CBL-CAT6-100 Shielded CAT6 Cable 100’ **
4 x CBL-CAT6-50 Shielded CAT6 Cable 50’
**Shielded cable between AD-24 and MIX-16 is required. CAT6 is not required, CAT5 is acceptable.
