3-1
82275345-003
Section 3
Cleaning the Unit
Processing of paper documents will over time generate debris such as paper dust, staples,
or other foreign matter that will require operator cleaning in order to maintain peak
operating performance of the unit.
The QUANTUM DS has been designed to make cleaning easy to perform, and it is
recom
mended that cleaning operations be performed by the operator on an “as needed”
basis.
This section identifies which cleaning procedures are required, illustrates how to properly
complete these procedures, and describes the cleaning supplies. Burroughs has
available, through the
Digital Check
website, a variety of cleaning supplies and
replacement items specifically designed to maintain the QUANTUM DS units.
Two cleaning procedures are recommended for use with the QUANTUM DS product; a
“rapid cleaning” and a “detailed cleaning” procedure.
Rapid Cleaning
To perform the rapid cleaning procedure, run the check scanner cleaning card through the
unit following the instructions on the card envelope. As the cleaning card travels through
the unit it contacts and cleans paper handling surfaces and components inside the unit,
without removing the unit covers or track walls.
Using the rapid cleaning procedure saves operator time and may reduce the need to
perform the detailed cleaning procedures.
Detailed Cleaning
Detailed cleaning procedures target specific critical components and devices inside the
QUANTUM DS unit. Detailed cleaning procedures are implemented when specific
performance and/or operational problems occur.
The main areas of the unit that may require detailed cleaning are the following:
Track (paper path)
Front and rear image glass
Rear image camera removable wall
Fixed rear image camera wall
