TellerScan 4120 User Manual Rev 050609
9
How to Load Checks
TS4120 – The automatic-feeder can hold up to 100 items. Use the following directions:
1. Remove all rubber bands, staples, paper clips, pins, etc.
2. Load the items into the automatic-feeder with the front of the items facing away
from the scanner (Fig 8).
NOTE:
Checks must be jogged properly in order to feed correctly. The bottom and right
leading edges of the check stack must align with one another (See Fig. 8).
3. Slide the items into the automatic-feeder until the left LED light illuminates (Fig.
7).
4. This indicates the scanner is ready to begin feeding the items. DO NOT force
the items into the automatic-feeder after the light illuminates, as this may
increase jam rates.
Fig. 8: bottom & right
edges aligned
