Digital Data Communications Level One GTL-2091 Manual Download

Page: 5 / 6

http://www.level1.com

Anti-Attack Configuration Commands

- 3 -

1.1.4 filter igmp

To filter IGMP attack, use the filter igmp command.

parameter

none

Command mode

Global configuration mode

example

Console_config#filter igmp

Related commands

filter enable

1.1.5 filter arp

To fliter ARP attack, use the filter arp command.

parameter

none

Command mode

physical interface configuration mode

example

Console_config_f0/1#filter arp

Related commands

filter enable

1.1.6 filter enable

To enable filter feature, use the filter enable command.

Summary of Contents for Level One GTL-2091

Page 1: ...Anti Attack Configuration Commands GTL 2091 V1 0 Digital Data Communications GmbH Germany http www level1 com ...

Page 2: ... Anti Attack Configuration Commands 1 1 1 Anti Attack Configuration Commands 1 1 1 1 filter period time 1 1 1 2 filter threshold value 1 1 1 3 filter block time value 2 1 1 4 filter igmp 3 1 1 5 filter arp 3 1 1 6 filter enable 3 1 1 7 show filter 4 ...

Page 4: ...ilter period time 1 1 3 filter block time value To configure the time to block attack resource use the filter block time value command parameter parameter description Value Time to block attack source in seconds default 300 seconds command mode global configuration mode example Console_config filter block time 600 Related commands filter period time filter threshold value ...

Page 5: ... configuration mode example Console_config filter igmp Related commands filter enable 1 1 5 filter arp To fliter ARP attack use the filter arp command parameter none Command mode physical interface configuration mode example Console_config_f0 1 filter arp Related commands filter enable 1 1 6 filter enable To enable filter feature use the filter enable command ...