-5-
6) Insert the FDD unit so that
its guide grooves fit the
chassis guide ways. Push the
u n i t i n u n t i l i t s r e a r
c o n n e c t o r i s c o n n e c t e d
securely.
7) Fix the unit in place with its
two (2) attachment screws.
8) Last, re-attach the rearface
Blank Panel removed in
step 3).
screws A and B
4) Loosen the PL-FD210 unit's
two (2) upper adjustment
screws (screws A and B), and
remove the two (2) lower set
screws (screws C and D).
5) Slide the unit in the direction
shown by the arrow, until the
lower set screws' screw hole
appears. Re-insert the two
(2) lower set screws, and
tighten both upper and
lower (4) screws.
screws C and D
