Chapter 3 – Installation and Wiring
3–18
GLC2300 Series User Manual
Available Printout Features
The following table lists printout features available with the I-ASCII font. Japa-
nese, Korean, Taiwanese, and Chinese fonts are not available.
Printout Features
NEC PR201
EPSON ESC/P
HP LaserJet
Screen Hard Copy
X
X
X
Print Alarm Message
O
O
O
Real-time print of Q tag alarm
O
O
O
Batch print of Q tag alarm
O
O
O
Print Log Data (Single Block)
O
O
O
Ethernet Interface
Pro-face strongly recommends that a trained engineer install
your Ethernet network.
3.5
CF Card Insertion and Removal
3.4
Ethernet Cable Connector
The GLC Ethernet interface is IEEE802.3 compliant, and transmits data at 10
Mbps. Your Ethernet connector can be found on the GLC, as follows:
When using the GLC unit’s CF Card interface, follow these
precautions:
• Prior to inserting or removing a CF Card, turn the GLC unit’s
CF Card ACCESS switch OFF, and confirm that the ACCESS
lamp is not lit, to prevent damage to or loss of CF Card
internal data.
CAUTIONS
