4-5
Chapter 4 – Transfer Screen Data
GLC2300 Series User Manual
4.2.1
Checking the IP Address
The following procedure explains how to check the IP Address assigned to the GLC as
well as checking precautions.
1. Call up the GLC unit’s menu bar.
For instructions on how
to call up the menu bar,
see
6.4.3 – “SET UP
TOUCH PANEL.”
2. Click on the left-side 1/3 cell of the
menu bar to call up the 2/3 menu.
3. Next, click on the 2/3 cell to call up the
3/3 menu.
4. The IP Address assigned to the GLC
will appear in the menu bar.
After changing “Ethernet
Setup” settings, the GLC
must then be reset or the
power cord must be recon-
nected. The IP Address will
not appear in this screen
unless the GLC is reset or
t h e p o w e r c o r d r e c o n -
nected.
