2
Installation Procedures
This chapter describes how to install a BA42B system. It gives information on
the following:
• Preparing the site
• Unpacking the system
• Installing a BA42B system
Since the back of the enclosure differs from model to model, the portion of
this chapter devoted to the actual installation of the system is divided into
two sections; the first covers the VAX 4000 Model 100, and the second section
covers the VAX 4000 Models 100A/105A.
2.1 Preparing the Site
Before you unpack the BA42B system, verify the physical, environmental, and
electrical requirements described in this section.
2.1.1 Enclosure Dimensions
Figure 2–1 shows the dimensions of the BA42B Enclosure.
Caution
The container and enclosure together typically weigh 20.50 kilograms
(kg) (45 pounds [lb]). Two people are required to handle the container.
Installation Procedures 2–1
